PVC resins first. Then the full polymer range.

Polyvinyl Chloride

Polyvinyl Chloride is a versatile thermoplastic used in both rigid and flexible products. Its final characteristics depend on resin grade, K-value, additives, formulation and processing conditions.

High-Density Polyethylene

High-Density Polyethylene is known for its relatively high stiffness, chemical resistance and suitability for many rigid and flexible industrial products.

Low-Density Polyethylene

Low-Density Polyethylene is a flexible polyethylene commonly used for films, coatings and applications requiring flexibility and easy processing.

Linear Low-Density Polyethylene

Linear Low-Density Polyethylene is widely used in flexible films and packaging where toughness and puncture resistance are important.

Polypropylene

Polypropylene is a widely used thermoplastic valued for its low density, chemical resistance and suitability for moulding, extrusion and fibre applications.

Medium-Density Polyethylene

Medium-Density Polyethylene offers properties between low-density and high-density polyethylene, depending on grade and formulation.

Polyethylene Terephthalate

Polyethylene Terephthalate is a polyester thermoplastic widely used in packaging, fibres, films and sheet applications.

General Purpose Polystyrene

General Purpose Polystyrene is a rigid, transparent polystyrene used where clarity and ease of processing are important.

High Impact Polystyrene

High Impact Polystyrene is a rubber-modified polystyrene developed to improve toughness compared with general-purpose polystyrene.

Expandable Polystyrene

Expandable Polystyrene beads are processed into lightweight cellular foam products.

Ethylene-Vinyl Acetate

Ethylene-Vinyl Acetate is a copolymer whose flexibility, clarity and adhesion vary with vinyl acetate (VA) content.

Acrylonitrile Butadiene Styrene

ABS is an amorphous terpolymer that balances rigidity, impact strength and surface finish, making it a common choice for housings and moulded parts.

Polycarbonate

Polycarbonate is a transparent engineering thermoplastic known for high impact strength and good heat resistance.

Polyamide 6 (Nylon 6)

Polyamide 6 is a semi-crystalline engineering polymer offering toughness, wear resistance and good mechanical strength.

Polyamide 66 (Nylon 66)

Polyamide 66 offers a higher melting point than PA6, suiting parts that need strength at elevated temperatures.

Polyoxymethylene (Acetal)

POM is a semi-crystalline engineering polymer known for stiffness, low friction and dimensional stability in precision parts.

Polybutylene Terephthalate

PBT is a semi-crystalline polyester valued for electrical properties, dimensional stability and fast moulding cycles.

Polymethyl Methacrylate (Acrylic)

PMMA is a transparent amorphous polymer known for excellent optical clarity and weather resistance.

Styrene Acrylonitrile

SAN is a transparent copolymer offering better chemical and heat resistance than general-purpose polystyrene.

Acrylonitrile Styrene Acrylate

ASA is similar to ABS but uses an acrylate rubber, giving significantly better UV and weather resistance for outdoor parts.

Thermoplastic Polyurethane

TPU is an elastomeric thermoplastic combining flexibility with high abrasion resistance and toughness.

Thermoplastic Elastomer

TPE is a family of rubber-like materials that can be processed like thermoplastics, often used for soft-touch and sealing applications.

Thermoplastic Olefin

TPO blends polypropylene with elastomers and fillers, offering impact resistance and weatherability at low density.

Polyphenylene Sulfide

PPS is a semi-crystalline high-performance polymer with high heat resistance, inherent flame retardancy and strong chemical resistance.

Polyether Ether Ketone

PEEK is a high-performance semi-crystalline polymer used where high temperature, wear and chemical resistance are required together.

Polyetherimide

PEI is an amorphous high-performance polymer with high heat resistance, strength and inherent flame retardancy.

Polysulfone

Polysulfone is a transparent, tough amorphous polymer with good heat and hydrolysis resistance.

Polytetrafluoroethylene

PTFE is a fluoropolymer known for very low friction, exceptional chemical resistance and a wide service-temperature range.

Polyvinylidene Fluoride

PVDF is a melt-processable fluoropolymer offering chemical resistance, UV stability and good mechanical strength.

Polylactic Acid

PLA is a bio-based polyester commonly derived from renewable resources, used in packaging, fibres and 3D printing. Compostability depends on grade and conditions.

Colour Masterbatches

Concentrated pigment dispersions in a carrier resin, used to colour base polymers consistently during processing.

Additive Masterbatches

Concentrates carrying functional additives — such as UV stabilisers, slip, anti-block or anti-static agents — to modify polymer performance.

Polymer & Filled Compounds

Base polymers compounded with reinforcements, fillers or modifiers — such as glass fibre, talc or calcium carbonate — for specific performance targets.

Reprocessed & Recycled Polymers

Mechanically reprocessed polymer granules from post-industrial or post-consumer sources. Properties vary by source and must be verified per lot.